Neway — ADZ
Description
This suspension is a heavy-duty on- and off-road drive axle air ride suspension that is 220-lbs lighter per axle than its predecessor, Neway AD. The upper control arms use the V-rod design with vertical end bushings. The lower control assembly has an integrated one-piece design to increase roll stability. In the front, it features an easy alignment pivot connection with a rotatable pivot collar for axle realignment while the rear of the assembly uses a solid connection between the cast trailing arm and transverse beam.
Heavy applications are typically front/rear mixers, construction, fire, aggregate dumps, logging, mining, oil & gas. Over-the-road applications include refuse, municipal, heavy haul and utility trucks.
Tech Tips and Additional Resources
ATRO offers polyurethane replacements for beam and center bushings, a V-rod assembly, and/or straddle and hollow mount apex bushings separately or as part of a rebush kit.
V-rod:
- V-Rod Assembly – TR57-44992 is a V-rod with ATRO’s polyurethane bushings pre-installed (TS59-22400, vertical straddle and TH57-22264, hollow apex.)
- V-Rod Rebush kit – TR57-44645 – with the TH57-22264 apex bushing and two TS59-22400 vertical straddle bushings with all attaching hardware included. (OE # SRK-645)
- Replacement bushings – TS59-22400 and TH57-22264 available separately, without hardware.
Lower Control Arm:
- Beam end bushing kit – PB57-26643 – with two pivot bushings (PB57-26279) and attaching hardware
- Axle seat bushing kit – AS57-27644 – with two axle seat bushings (AS57-27267) and attaching hardware
- Replacement bushings – PB57-26279 and AS57-27267 available separately, without hardware
Wear Items
- V-rod bushings, particularly the apex bushing which the OE does not sell separately; available as ATRO’s TH57-22264
- Beam end bushing, OE# 90008266; replace with ATRO’s PB57-26279
Key Parts
Details

Neway ADZ
Suspension details showing ATRO part PB57-26279.

Neway ADZ
Suspension details showing ATRO V-Rod Assembly TR57-44992.